Sticky Situation! We needed a rotator!

Team work is dream work You boys made that pile of trash look like child's play getting 80k lbs out of a hole . Hope the driver is O.K. . Great to see competitors work hand in hand . Dang shame we cannot get Both sides in congress to do the same and help all us poor people out . Thank you for sharing .

Great job Mr Hal. Very minimal cargo loss. I’m always impressed how polite and respectful y’all are with each other. Nice to see professionals doing a good job. Cheers from Ontario Canada.

Mr. Hal, it is a real pleasure and an honor to watch your videos. I have never seen so much professionalism than yours and your team AND to see you bring in a fellow competitor and the level of "wrecker fellowship" (You scratch my back, I'll scratch yours) is an absolute pleasure to watch; in this day and age, you just DON'T see anymore! / I gotta echo @John Craig's comment "One of the best Recoveries I have seen!" Stay safe out there all of you!

It's nice to see 2 different wrecker companies working together to get a road back open and the wrecked semi truck removed from the ditch

Not a good way to start the thanksgiving day , did any one expire in this wow wet road lack of judgment makes for a wrecked up truck and trailer , ok your next truck needs to be a rotator right or is the rotator yours it’s on its way lol thanks BigAl California

My wife is from the Somerville area and has family there. I'm hoping some time when we are there visiting family I run into you and Wilbert some where. I'd like to meet you great men some day. I'm a 53 year old machanic and do some towing. I know you gentlemen have some good stories. I really enjoy your videos.

That driver is lucky to be alive,must have let the steer tire slip onto the shoulder
.Double stacked totes is a recipe for disaster,creating a very high center of gravity.Good thing it was not hazmat
Nice collaboration on the recovery

very enjoyable video for my grandson and i. he just loves watching mr. hal, mr wilbert, caleb shane and the crew! he yells "careful guys" and "here it comes" throughout the entire video. when its done, he says "they did good papaw!". thanks for all the effort you all put into making these videos we certainly appreciate it.

Thats to bad that box door busted open. That rotator was awesome.

A good well managed job. Good prep. for rotator’s arrival.👍👍👍🙏🙏😊

I just hired on with a company to drive/operate a heavy wrecker. I've been driving tractor trailers for over 30 years, with no rollovers and no high-speed accidents. There's no training program or trainers of any kind with this company, so I'm watching as many of your videos as I can. I guess I could call it Online Wrecker School. I've had safety pounded into my head for 4 decades, and I've got good mechanical skills. The truck they gave me (KW T800 with a 25T Century body) is kinda hammered, but it's functional. You guys are great at what you do, and good attitudes abound among you. There's no infighting or arguing, on camera anyway. I very much appreciate the time and expense you've put into these videos. Keep up the excellent work.

That driver definitely went for a wild ride pucker factor x a million.

Glad to hear the driver walked away, looking at the truck I had my doubts anyone could survive.

It looks like the two wreckers service work great together. No egos got in the way to get the job done. Slow and easy wins the race.

Wow, what a mess. Glad to read that the driver survived. Great show of force & teamwork between Mr. Hal & crew & the boys from Truck Service of Florence to get the job done.

It's a good thing to see two companies working together to get the job done

Great video. That was one heck of a wreck. That was a great job the rotator operator did under those conditions.
Keep up the good work.

Great to see everyone working together to get the job done. Fine job Mr Hal. Prayers for the driver. Stay safe.

One of the best Recoveries I have seen, this was very Technical.... Kudos to everyone who helped, all of you guys jumped in and did what needed doing.

That was a bad wreck prayers for the driver hope he or she is okay great job love to see how to different wrecker srevices can work well together i admire you all thats a ruff job and dangers job i could not do it my hats off to all wecker drivers jog well done great video you all stay safe out there

I forgot to add y'all did a excellent job.

Always nice to have a relationship with other companies. Helping each other with different situations is a win win. Used to do that in the glass business, working with a couple of other companies when you need additional help to do a job, everybody benefits.

Amazing to see the joint effort and skills of both of these companies working together !!!

Now, that was a mess but you all got it out gr cooperation from all involved.

good to see y'all working so well together, you always do..love the southern way of being polite & professional, the south could teach the world how to behave.

Mr. Hal good job by all involved. Good to have someone to call on when needed that knows what they are doing. Glad the driver is OK.

That was great team work getting the job done. Outstanding collaboration and being safe while working. Stay safe out there.

WOWZERS! That was a nasty twisted mess to recover. Nicely done as always, Mr. Hall & team!

For this being such a delicate situation I think you guys knocked it out of the park. Great job!

This was really interesting. Thank you for sharing it with us. Nice rotator!

That was a great example of teamwork and respect.

WOW, that was something else! Too bad they don't have a "jumbo vacuum" because that is about all that was left of that mess. That God the drive lived! Great video. Great team work.

Can't wait to see the day that you have your own rotator Mr Hal

That was a Wild one Mr. Hal . Alway's hated messing with chemicals . The small containers can be a pain in the rear when loaded heavy . Great team work and a SAFE recovery .

Wow that was a pretty bad wreck hope everyone came out of it ok. Great job. Be safe

You guys did a fantastic job of bringing the frt box up on to the roadway. That tractor is "Totalled" so is the trailer and box. Great job. Interesting watching the video.

That one came out as hard as it went in. Mr Hal you guys work together and make it happen. 👍

Keep up the good work love watching you on RUclips buy the way I'm back in hospital again

heck of a mess Mr Hal. Nice to be able to work together with fellow companies. Good work, stay safe!

You need a rotator. go fund Sumter wreckers for a million plus rotator we can do it million people. Buck a piece

Thank you and stay safe.

Well hand yaw made it this far without one so you will make do without one this time. That what i tell.people.all.the time where i work. We didnt always have rotators amd we always made do. Looks like that one is a mess. Hopefully the truck driver is ok. It looks like a bad wreck. God bless and driver and hoping he is ok

Mr Hal it was great to see how everyone was working together but Caleb was a Maestro with those cranes and winchs. Everyone stay safe now Terence

Wow Mr. Hal that was one heck of a wreck, glad the driver survived. Great work by all involved👍

Nice job again my friend. take easy make nice

Mr.Hal , thank you for the video , did a awesome job on that recovery , I haven't seen anything that bad since I ran freight to the West Coast , Stay Safe .

What a big mess . Glad to see Joe is still with you . Haven't seen Mr. Wilbert for awhile , hope he is ok .

A huge, complicated job. VERY well done.

As always Mr Hal another Great job done and like I always say take care out there

That was quite the job. Lot of teamwork with another company which is good. That was a lot of work. Now the guys who have to clean up the spill. They're going to have a fun job. But you did all right there. Good stuff. Good bunch of man. You got working for you. 👍👍🙂🇨🇦

Not a lot left of the tractor! Driver was lucky to get out of it! That was a lot of glue! Good job with the Sumpter crew and the Rotator crews too!

Sumter wrecker needs a 90 ton rotator! I’m sure Mr. Wilbur would love it! By the way, that rotator is bigger than Ron Pratts! It sure is nice seeing companies work together around my neck of the woods it’s every man for himself.

Looked like a State job Mr. Hal with all them people in yellow safety vest standing around watching you and your guys work!! Thanks for the video!

I'm surprised that tractor untwisted enough to tow. Great recovery for 2 companys that haven't worked together before (assuming I heard right---hard of hearing).
Greetings from the UK

This was an exciting one Mr. Hal. Others have said this, it's good to see companies working together. You never know when either one of you needs help.

Mr. Hal it was awesome seeing y'all work together so well as that was a very interesting recovery. And thank you for worrying about damaging the motor because I only got 15 more payments and it's mine!

Man fellas that rotator there is a hoss. We have a 75 ton at my job and it has dual front steers too . Its a peterbilt 367

Great work guys lot of hard work there.

Brilliant salvage job yet again really enjoy you're channel I hope the driver was ok 🙏🙏

Man that is one bad ass rotator I love four wheel steer

Good job ! I kinda' miss doing that stuff. Be Safe out there

i was worried when the rotator had one side off the ground know it wasn't much but had me worried. was glad the trailer contents stayed in as well. wonderful job done by everyone i was on the edge of my chair the whole time

Now that was a tangled mess for real. Great job 👏 . Time for your own rotator now.

Thank you sir for the education! I'm not in the business but use rigging often to move machinery and vehicles for myself and with friends.
These videos are fine training aids.

Nice recovery Guy's, maybe you'll will get a rotator in the future!!! Good Lord knows you can use one even if it's used!!!! Great video

mr hal you got some good workers help ing you

that rotator is quite the impressive piece of equipment. nasty wreck i wouldn't even know where to start on that mess. fantastic job as always.

That was a crazy job!!!
You guys do great work!!!!!
As always, thanks for the videos!!

What a mess! Glad to hear the driver survived. Nice job by both crews to get that mess upright and back up to the road. Very interesting video. Thanks! 👍👍👍 Happy Thanksgiving to you and yours!

did the driver survive that,another amazing job,by a team of real professionals

Man, that was a mess! Twisted up like a pretzel. I hope the driver wasn't hurt!

A realy great show.

That boy runnin that rotator is a cat bird.he may have to go to the top of my list of best operators.

Hope the driver survived the fiasco.
Nice job cleaning up this mess.
Hope y'all have a safe happy Thanksgiving.

Great job Mr Hal! At least this was a can and not a van trailer. That would’ve been a stickier mess right there!

Heckofa holiday special Mr Hal. Stay safe and happy thanksgiving.🦃

Great job on that recovery… take care and stay safe!

I agree Mr. Pratt you need a rotator great video prayers for the driver. Happy Thanksgiving to you all

That was about the messiest mess I have seen you work through. Great to see cooperation between recovery companies for the good of the public.

complicated job the driver was blessed

That was a great video.
Hope y'all have a blessed Thanksgiving.

Great job by both companies. You guys worked very good together. Very professional. I like Mr Hal how you can see ahead at what needs to be done and you just go ahead and do it. I guess you have a lot of experience at that kind of work. Happy Thanksgiving to you and your crew and families. Be safe and thanks for sharing.

Nothing that a little paint and polish won't fix lol love your videos be safe and have a great holiday Sam

Excellent team work. May you all have a Blessed and safe Thanksgiving.

As always wonderful post. Hope you all have a very relaxing enjoyable Thanksgiving tomarrow with familys

awesome recovery you did i enjoy your page

Now this is a bunch of people that can work together on a job that is as bad as this to get a job done like a fine art.you all need a big pat on the back and a big thank you

That look like a heck of a mess the truck look like it faired the worse out the deal hopeful the driver was okay and not injured

Quite a bit of know how displayed on this one Mr. Hal. Appears you have some good workers on your payroll. I know you realize how hard they are to find today.

Great recovry job👈👍 sumter. Towing

You all did a nice job. You need a good county or city towing contract to justify a 50-ton twin steer Kenworth.

That was quite the recovery. I was a little nervous when he started picking up the stabilizers. Wow.

True team work ...

Wow that was one hell of a job there Mr.Hal. Sounds like you worked with Kelly and Jerry before Everyone did what had to be done in the spirit of cooperation. No one on an ego trip. Glad to hear that the drive lived to tell about it. That poor Cascadia will not live to see another day. Looked like the frame was all twisted but I'm sure wherever it winds up it will be picked for parts. BTW that was a nice Miller Rotator but I don't see the need to have a double steer.
Stay Safe and happy Thanksgiving to you and your crew. I know someone is going to need a tow.

Awesome job cleaning up that wreck
Great video as always👍👍👍👍
HAPPY THANKSGIVING

🤯 my goodness great job guys

*Sticky situation!!* 🤣 I see what you did there Mr. Hal 😁 Great team work with the recovery fellas! Nice to see two companies working together to get a scene cleaned up. Kudos gentlemen 🪝

Nice Team Work !

Wish I could give you more than one like u guys worked 4 it 👍

Good job Mr Hal. Your team and the other crew worked together as one big team all helping each other out. Sorry if you mentioned it but if you did I missed it was the driver ok. Hope you are all having a good Thanksgiving and enjoying your holiday. You and your team stay safe out there 👍 🇬🇧👍